If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I have gotten Batman and Robin so far from an Ebay seller and Robin came with no emblem. I told the seller about it and I told FTC about it and ended up getting 1 top from each. Aside from the tightness issue that limits their posability I think they look Megorific and there is no breakage so far.
Still love the prospect of putting these on the new no rubber band bodies.
It is true that the greens photograph lighter than they look in real like. I digitally helped them a bit in this picture
Has anyone said?.....Why the extra Batman emblem??
The thinking was that some people would prefer more of a silkscreen approach while others would like a sticker that will fall off in thirty minutes just like a real Mego:-)
i put small screw eyes into the shoulder sockets, and now they're fine. i did the same with my Type 1 hips/fore-leg sockets to correct the wide-leg stance. the screw eyes can not be seen, and the bodies' strength & integrity are simply re-inforced
bat and friends.jpg
Here's how they look on Doc's buff swivel arm body. Robin lost an arm in the removing of clothes. Riddlers body will likely lose one of his if he's touched again. The hands switched fine. I wasn't sure they would fit until I tried. Much happier with them now. I wish figures would have an option just to buy the head and outfit. It may not be in their licensing agreement though. Whoever's making Capt Action may have a problem with it. I am still happy I purchased them and have preordered series 2, 3 and Titans from my lcbs. They were very reasonable with their pricing and not any more than I would have paid after s&h from Figures. I like to give them business when I can.
I have been a bit harsh on the FTC bodies. The arm situation renders these useless as a toy for children. When the arms snap off shortly (if they haven't already in the package) then the average parent who bought these for their children will not say, "Ooo, guess I better order a new body from Doc.". They will say "What a cheap piece o' $30 turd. I guess I won't be buying Little Jimmy any more of these."
As a collectable they are awesome because most of us do know the address to Doc's website and can handle a little thing like a body swap. We shouldn't have to but that's another story.
So, today, I am taking a Bif Bang Pow Doctor Who Master out of the package and instantly one hip pin disintegrates. Taking the clothes off to inspect the damage the other hip pin blows. Then I look at the arms and they display the exact same tearing I found on the FTC Batman. Different style elastic but same result.
I guess FTC isn't the only one that isn't quite up to snuff? Now, does anyone have a spare redish brown body lying around?
- Marty
It is not so much the design of the figures as it is a materials issue. I am not that well versed in the different types f plastics used in modern toymaking, but the materials used for the arms are much softer than what was used 35+ years ago, and the rubber bands are strung very tightly.
Because of the arm issue, I have taken to restringing T1 style any BBP or eMCe figure I give to my kids. Once you get the super tight bands and metal couplers off of the shoulder joints, they hold up great! It looks as if FTC is using a similar plastic now for the arms on their new bodies. I haven't picked up any new FTC items to make a comparison, but if they are compatible with their earlier bodies, those arms are made of a less malleable plastic. Perhaps some of those old ctvt bodies will come in handy now.
If it is a large scale problem, then I could definitely see consumers deciding not to be return customers. So, hopefully, this is a short term issue.
I have been a bit harsh on the FTC bodies. The arm situation renders these useless as a toy for children. When the arms snap off shortly (if they haven't already in the package) then the average parent who bought these for their children will not say, "Ooo, guess I better order a new body from Doc.". They will say "What a cheap piece o' $30 turd. I guess I won't be buying Little Jimmy any more of these."
As a collectable they are awesome because most of us do know the address to Doc's website and can handle a little thing like a body swap. We shouldn't have to but that's another story.
So, today, I am taking a Bif Bang Pow Doctor Who Master out of the package and instantly one hip pin disintegrates. Taking the clothes off to inspect the damage the other hip pin blows. Then I look at the arms and they display the exact same tearing I found on the FTC Batman. Different style elastic but same result.
I guess FTC isn't the only one that isn't quite up to snuff? Now, does anyone have a spare redish brown body lying around?
- Marty
I can see this getting rather old after a few figures doing this.... I think those new rubberband-less bodies are gonna be a big hit in the long run.
I have been a bit harsh on the FTC bodies. The arm situation renders these useless as a toy for children. When the arms snap off shortly (if they haven't already in the package) then the average parent who bought these for their children will not say, "Ooo, guess I better order a new body from Doc.". They will say "What a cheap piece o' $30 turd. I guess I won't be buying Little Jimmy any more of these."
As a collectable they are awesome because most of us do know the address to Doc's website and can handle a little thing like a body swap. We shouldn't have to but that's another story.
So, today, I am taking a Bif Bang Pow Doctor Who Master out of the package and instantly one hip pin disintegrates. Taking the clothes off to inspect the damage the other hip pin blows. Then I look at the arms and they display the exact same tearing I found on the FTC Batman. Different style elastic but same result.
I guess FTC isn't the only one that isn't quite up to snuff? Now, does anyone have a spare redish brown body lying around?
sorry, but for 25 bucks (plus shipping and FLA sales tax which would put this figure at around 30 bucks, its not like I can buy one off the shelf at TRU) I should get a decent usable figure, not something I am going to have to customize to get right. The really bad part of this is its not a great first impression on somebody just getting into this hobby.
I was just saying that to my wife.
Some people don't even know how to fix Megos.
Thing is, even expensive Hot toys like you mentioned, are not free of defects. Go to the Sideshow message boards and hear all the problems and whining.
Totally agree....and I'm part of the forum. "The Bat" of course.
These bodies are clearly light years ahead of where they were in 2005. There's no hideous flashing, they aren't totally brittle and falling apart like rotting corpses. I'm in love with the heads, the squishy factor is just perfect.
That said, having that shoulder fail is not okay. For Christmas I'll be giving a few of these figures to a young boy and he will play with them. It's not too much to expect that it will stand up to play...it's a toy. You cannot rely upon all your product staying in the package or being handled gingerly by collector hands or repaired by savvy Mego-heads. PART of the whole dream of bringing back Megos was also to interest a younger generation in them. I've seen first hand how popular they can be with young kids, Megos are fun to play with, make sure they can take it.
Getting this body right has been a challenge for all the ReMego players. I'm surprised no one took the Zicaway approach before.
Thing is, even expensive Hot toys like you mentioned, are not free of defects. Go to the Sideshow message boards and hear all the problems and whining.
Leave a comment: