Kneepin questions

[haggis]

Thanks for the advice and also the technical jargon. Now I know what the 'thingy' and the 'whatsit' are actually called. I'll give you technique a whirl!
Cheers!

[AAAAA]

What I use in to push Pin into the" bushing ",Yes folks its called a bushing
Is a Drift. Now, you said that the pin is loose. on that the pin size lenght may be little longer ,
or its not pushed enough , , find a nut that that is the same size as the bushing flange. place the nut on work surface (NOT THE KITCHEN TABLE) Place the knee with the bushing side down over the nut(pin head should pointing up) take a unshaperen pencile and place it on the pin's head , and push down.this should lock it in tighter if pin is not all the way in, You should see the locking knob of the pin sticking throught the bushing center.

[haggis]

Was it sufficient for you to push the repro knee pin parts together with your fingers or did you use pliers or some other tool? I'm trying to replace the knee pin on my General Urko and it doesn't seem to fit as tight as the other knee pin when I push it together by hand? Just wondering...I am also a newbie at figure repair. Sorry for intruding on your thread, shornk!

[shornk]

Thanks AAAAA. I just got a message from the Doctor and he said exactly that. Large versions are for the Hulk knee pin. The Hulk's elbow is the regular knee pin and socket. His knee pin is the large set.

Thank you everyone for your help.

[AAAAA]

I swap knee pins within ST megos its a standard knee pin, the larger ones I belive are for Hulk bodies

[shornk]

I think the Doctor is not in currently. I'm unable to get a response from him, but I'll definately wait for the better quality. He is probably busy due to the whole EMCE WGSH release.

[z3zep]

Send an email to Doc Mego, he will get back to you. or PM him here.

[shornk]

I hit a bump in the road. There are two differant 8 inch figure knee pins listed on Doc Mego's site. Which ones work with Star Trek Figures? The normal 8 inch or the large 8 inch?

[z3zep]

You may have to shave them down a little bit, but they are better.

[shornk]

Doc are superior ove CTVT Not dissing Mego store
BUT seeing how poor the bodies construction and size of the holes varied , docs might be to big.MIght BE is the word.

Thanks everyone. I will probably go with Docs and just see how it goes.

[AAAAA]

Doc are superior ove CTVT Not dissing Mego store
BUT seeing how poor the bodies construction and size of the holes varied , docs might be to big.MIght BE is the word.

[z3zep]

I would go with Dr. Mego.

[shornk]

I've got four figures with broken knee pins. Anyone know the merits between the differant choices out there? There are the CTVT pins at the MegoStore and the 8 inch knee joints sold in differant colors from Doctor Mego. Which ones are sturdier? I like the Doctor Mego pins because they come in differant colors.