What's the best way to make Custom Gloves?

[highquality]

So, I've made my first pair of custom gloves, but surely there's a better way. I stacked two pieces of vinyl together and cut them with a hot razor. The hot razor sealed the ends, but obviously had limitations around corners. The technique seems sound, but I need a better tool to do the job.

I was thinking about taking those flexible metal paper binders to form the shape. The have a sharp enough edge to cut, plus they can be formed into different shapes. Anyone ever done this, or have better ideas?

Thanks.

[piecemaker]

Maybe a woodburning pen?http://cgi.ebay.com/WOOD-BURNING-PEN...item439ec01867

[piecemaker]

Here's another site that sells variable temp ones.http://www.woodburning.com/toolshop/type.asp?iType=17 You could attach a wire in the shape of the glove, to one of these,then press it into the vinyl once its heated to correct temp and fuse the pieces together.

[AAAAA]

you have to bend a steel wire is the shape of the glove and hook it up to a electrical power source (sodering iron)
put vinyl on a stone base covered with teflon ,Place wire frame on teflon place teflon over that and press with a block cover with
heat resistent rubber.