Help support the Mego Museum
Help support the Mego Museum

Announcement

Collapse
No announcement yet.

ST:TMP Drydock - larger scale

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • NemVia
    Museum Patron
    • Oct 12, 2007
    • 123

    #31
    February Updates - 2016 Okay! Finally I've been able to get some updates back on the site. I've started by adding 12 new pics to the February Updates- 2016 page. My primary work is for the Hanger bays seen on the front of the Overhead modules. My version of the dock will also include Hangers on the rear of the dock as well. The larger one will have the Hanger doors open so you can see into the hanger and view the storage containers as well as the work bees and shuttle craft that are stored there. After I finish the assembly of the hanger walls I will be working on the main hanger deck. I'm also adding a little more functionality to the smaller flight decks that are seen on the Starboard side module. I', adding some access doors to the back walls to give them a little more depth. Thanks for your patience in all of this. I will have more updates coming next month! See you then!

    Mark
    Last edited by NemVia; Jul 11, '17, 4:36 PM.
    ...Once it's activated, there's no way to stop it! - Scotty: DMa
    www.NemVia.org

    Comment

    • NemVia
      Museum Patron
      • Oct 12, 2007
      • 123

      #32
      March Updates - 2016


      I've got a whole slew of pics for this months update! I've been concentrating on the larger hanger deck for the rear Starboard side of the overhead modules. As with the 1/350 scale version I'm adding a warehouse-like storage area for one side of the Modules. The front end of the Drydock will appear as it did in ST:TMP. The idea of showing the hanger is just to show what might possibly be on the interior of these modules. I figure that since the Enterprise is facing forward inside the dock it would make the most sense to have the supplies and cargo containers come out of the aft end of the modules to be loaded into the Shuttle Bay on the Enterprise. I'm trying to make this hanger a lot larger than the 1/350 scale version. I'm currently adding a lot of detailing to the walls and ceiling, etc. I've make some extra holes in both the deck and the ceiling for overhead lighting. As of this update I've pretty much have all of the wall details in place and I've begun spraying the parts both for light leaks and final colors. There are 30 pics in this month's update. Take a look and let me know what you think! See you next month!

      Mark
      Last edited by NemVia; Jul 11, '17, 4:36 PM.
      ...Once it's activated, there's no way to stop it! - Scotty: DMa
      www.NemVia.org

      Comment

      • C.H.O.A.M.
        learning all the time
        • Sep 15, 2010
        • 1081

        #33
        This is absolutely mind boggling!

        Comment

        • rykerw1701
          Persistent Member
          • Aug 27, 2007
          • 1026

          #34
          I don't know if I'm more envious of the skill needed to make this or having the time to do it, but either way, it's outstanding. Well done!

          Comment

          • NemVia
            Museum Patron
            • Oct 12, 2007
            • 123

            #35
            Originally posted by C.H.O.A.M.
            This is absolutely mind boggling!
            Thanks guys! I appreciate your comments!
            April Updates - 2016


            This month I've been doing a lot of painting on all of the Overhead module hanger decks and entryways. The painting process can take quite a while because of all of the masking that needs to be done. All of the decks needed to have landing stripes and other colors added to them. I've been able to paint the main hanger deck and I think it looks pretty cool. It looks like a parking garage for the shuttles. I'll be adding the shuttles, Work bees and cargo containers soon. Well I 52 pics in this months updates. I mainly showed how the painting process was done. Check them out and let me know what you think. We'll see you in a month.

            Mark
            Last edited by NemVia; Jul 11, '17, 4:37 PM.
            ...Once it's activated, there's no way to stop it! - Scotty: DMa
            www.NemVia.org

            Comment

            • NemVia
              Museum Patron
              • Oct 12, 2007
              • 123

              #36
              July Updates - 2016


              Great Apologies for the long delays... Many many issues going on at the moment including some difficulties with the Drydock. More specifically the Chase lighting for the hanger decks. I've been trying to use some optical fibers I had lying around, which would have made for some great lighting effects but, alas, the fibers were way too brittle for the complex bending that needed to be done in the limited space between the hanger deck and the modules. After the fibers snapped on more than one occasion I needed to take a little breather before I pulled all of my hair out. I needed to get a more durable optical fiber, which I did. I found several sizes that were relatively in-expensive. I used a 1mm thick optic fiber for the chase lighting effect. I bought 500' of it hoping that will be more than enough. I still had some difficulty even with the thicker fibers, but I figures out a few different ways to bend them so they wont snap as easily. I first bundled the fibers according to their lighting pattern, then I put those fibers into a styrene sleeve. This would hold all of the fibers together so I can fish them through all of the holes that are on the landing deck. After that I could connect them to their respective LEDs and run them in their proper sequence. I also added some RED LED lighting for a warning track for the shuttles that are in standby for launching on the pad. I still need to straighten out some of the fibers, but the lighting effect is in place and working. Now I can continue on to the smaller hangers. I've also started painting up the Shuttles that will be seen inside the larger hanger. Some of them were cast in clear resin so I can have a lighting effect inside a few of them as well. Well, that's it for now. I was able to get passed this massive hurtle, so now I should be able to get back to my stride once again. There are 17 new pics in the JULY 2016 Updates page and I will try to get a video of the chase lighting effect in place. Thank you again for your patience and I post more next month. Thanks everyone!

              Mark
              Last edited by NemVia; Jul 11, '17, 4:37 PM.
              ...Once it's activated, there's no way to stop it! - Scotty: DMa
              www.NemVia.org

              Comment

              • NemVia
                Museum Patron
                • Oct 12, 2007
                • 123

                #37
                Here's the video update for the chase lighting effect.:
                ...Once it's activated, there's no way to stop it! - Scotty: DMa
                www.NemVia.org

                Comment

                • NemVia
                  Museum Patron
                  • Oct 12, 2007
                  • 123

                  #38
                  October Updates - 2016
                  Hey Everyone! No I didn't fall off the grid, I've just been extremely busy these past few months. I'm still working on the Drydock, but what I accomplished during August and September was very minimal and not worth the update. But I have a significant update and I hope you'll like it.
                  First off, I am still working on the lighting effects for the hanger bays. I've built some light sockets for the fiber optic effects, I've also been working on the shuttle craft that will be seen inside the open end hanger bay. They are all painted up and just need decals. I should be able to get those done by the next update. 4 of the shuttles will have some sort of lighting effect in them.
                  Next I took on the challenge of wiring together two sets of 60 LEDs for the work light Arrays. The soldering was very delicate and tricky. I needed to solder the wires as close to the LEDs as possible because there is a limited amount of space in the work light housing. I could have used the strip LEDs but they don't have the shape I wanted for the actual light fixtures. After getting them all soldered together I*took a few lighting test pics which came out really good.
                  Next I started building the housing for the work lights. These are scratch*built pieces with some ribbing details on the backside of the housing. I made these so they would slide over the back of the lighting array. There are some touch-ups and puttying to do but they are finished.
                  Also in the scratch build department I needed to build the vertical boom arm pivots. This piece will slide into the*Boom arm turrets and support the boom arms for the work cranes and work lights.*I made a master to be molded with silicon rubber. I then cast 7 of these pieces for the turrets. I also drilled holes into the vertical pivot so I can add the boom arms and wiring.
                  Lastly I was able to scratch build the boom arms. I used some Plastrux*tubing for the main part of the arm. I had to taper one end and lathe the other so it will have some interesting details. I also added some other details. Pieces that I call fins, as well as adding some eyelettes to the boom arms to support some thin rod pieces that come out of the vertical pivot. I don't know what their function is but it makes for interesting details. I managed to complete the two work light booms and assemble the arrays to the boom*assembly. Now I need to work on the turret mounts so that all of the work cranes can be connected to the panel frames in some manner.
                  There are 27 new pics*in the October updates - 2016 page if you would like to see how the building process went. Well, that's all for this month. Next month I should most of these items all painted up. See you then.
                  Mark
                  Last edited by NemVia; Jul 11, '17, 4:37 PM.
                  ...Once it's activated, there's no way to stop it! - Scotty: DMa
                  www.NemVia.org

                  Comment

                  • Godzilla
                    Permanent Member
                    • Nov 3, 2002
                    • 3008

                    #39
                    Great stuff and incredible work!
                    Mortui Vivos Docent
                    The Dead Teach the Living

                    Comment

                    • NemVia
                      Museum Patron
                      • Oct 12, 2007
                      • 123

                      #40
                      Thanks Godzilla! More to come in a couple of weeks.
                      Mark
                      ...Once it's activated, there's no way to stop it! - Scotty: DMa
                      www.NemVia.org

                      Comment

                      • NemVia
                        Museum Patron
                        • Oct 12, 2007
                        • 123

                        #41
                        November Updates - 2016

                        For this month's update I've finished wiring all of the turrets with their lighting effects. I've fed the wires through the bottom section of the turret and through a styrene tube at the back of the base of the turret. This makes it look more the filming miniature versions. After getting this all set up and adding the fiber optic strands to each of the work booms*I've also been working on the painting of the Work booms as well as the booms for the Work Light Array. There are 3-4 different colors used on these pieces. The main color was and off Yellow which somewhat resembles the color of our modern day work cranes. There are also gray and rust color stripes added as well as some military green. They were sprayed in layers, masked and then the next color was added. The final color was the yellow. They will need some touch ups to cover up some small pot holes created by the resin-molding process.
                        On the 1/350 scale dock I was not sure how I would mount these turrets to the dock because at that time there were no good pictures of the dock available. What you saw on the screen was all I could go by. But having seen the filming miniature in person I now know what to do to mount these pieces to the 1/260 scale dock.
                        There are some specialized mounting brackets that hold the turrets into place, so I'm trying to replicate them as best as I can using styrene. So far they are turning out okay and they look like they'll be able to support the weight of the turrets, especially the light arrays.*I should have them all painted up by the next updates. There are 20 new pics under the November Updates - 2016 page. Enjoy and feel free to comment. Thanks everyone. See you next update!
                        Mark
                        *
                        *
                        Last edited by NemVia; Jul 11, '17, 4:37 PM.
                        ...Once it's activated, there's no way to stop it! - Scotty: DMa
                        www.NemVia.org

                        Comment

                        • NemVia
                          Museum Patron
                          • Oct 12, 2007
                          • 123

                          #42
                          February Updates - 2017
                          SO WHAT HAPPENED TO DECEMBER AND JANUARY????????
                          Uh..... I dunno..... Just had to take a break. Been*busy with work family and a multitude of other things...... BUUUUUUUUUT! I'm ready to get moving again.
                          The pics are loaded up on the February Updates - 2017 Page.
                          *Okay, so I really didn't get a whole lot done the last couple of months, But I did manage to work on a few things. The mounting clamps for all of the work booms are now complete and I mad the pincers for the ends of the booms. I kind of improvised on these because I couldn't see any functional need to the Drydocks end pieces as seen in the movie. I will be making alternate pieces that mimic TMP end pieces so they will be interchangeable. They will just slip onto the ends of the booms. Anyway, the booms were cut to the same length when I first made them and I really can't finish them until I get the Enterprise in place. Then the booms will be cut to the appropriate lengths and the end pieces will be put on. I will also cut the optic fiber to be flush with the end of the boom.
                          Back to the turret clamps. I have these mounted on the bottoms of the swivel shaft and they are painted up to match the panel frames.* I've also started to do some re-wiring on the Enterprise Deflector dish. my client wanted the ramp-up, ramp-down*lighting effects added in so I need to run a few more wires through the dorsal. I've also replaced the LED in the dish reflector with a dual color LED. I should have this wired up by next update.
                          In other areas, I'm starting to apply the decals for all of the shuttles that will go in the Aft Hanger bay. I also needed to take out some of the wiring for the thrusters on the Enterprise model to make room for the Gang way on the Dock. There's just too much packed into it and it might cause problems later on. I've also mounted the Enterprise onto the dock but I'm afraid the ship might just weight too much for the bracket, so I might have to stabilize the ship with some wires. .013mm I think is*what I bought.
                          I know this wasn't much of an update, but I should be back on track during this month. Thank you everyone for your patience. I know this is a long project, but please bear with me and you WILL see it complete. Ahh yes I love that word complete. So check out the pics, let me know what you think and I will see you next month. Take care everyone.
                          Mark.
                          *
                          Last edited by NemVia; Jul 11, '17, 4:38 PM.
                          ...Once it's activated, there's no way to stop it! - Scotty: DMa
                          www.NemVia.org

                          Comment

                          • C.H.O.A.M.
                            learning all the time
                            • Sep 15, 2010
                            • 1081

                            #43
                            this is STILL blowing my mind!!!!!
                            absolutely unbelievable

                            Comment

                            • NemVia
                              Museum Patron
                              • Oct 12, 2007
                              • 123

                              #44
                              Thanks C.H.O.A.M. Appreciate the comments!

                              for everyone : New weblink:
                              http://www.nemvia.net Please disregard anything with Nemvia.com. I'll explain later.
                              Mark
                              ...Once it's activated, there's no way to stop it! - Scotty: DMa
                              www.NemVia.org

                              Comment

                              • NemVia
                                Museum Patron
                                • Oct 12, 2007
                                • 123

                                #45
                                July Updates - 2017
                                Hey Everyone! My apologies to all for the big delay. As you may have noticed my website was hacked and my NemVia.com version of my is no longer functioning for my website. I have had to update my site to NemVia.net and try to clean up as much of the garbage that the hackers have caused and try to get things back in order as best as I could. I've had a few setbacks with the Drydock build, sick relatives and other problems have caused further delays. Although I do have a small update for this month I think you'll find some of it interesting.
                                I became discouraged when I found out that I made a mis-calculation with my armature for the ship. This armature was to keep the ship level inside the dock and also allow it to appear to be floating while inside the dock. I poured over ways to correct this problem including some extremely thin steel fishing line that would hold the engines level with the dock. I decided to do what I did with my 1/350 scale dock armature and just bend the heck out of the thing until it help the ship upright and level the way I wanted it to.
                                Using a pair of pipe wrenches, I found the point where the armature meets the connection rod and pushing in opposite directions I twisted the armature enough to pre-load the tension in order to hold the weight of the ship in place. I have a pic of how I was able to do this in the July Updates - 2017 page. It took me a couple of tries, but I finally got the ship to appear level inside the dock. She FLOATS! I exclaimed! Anyway that was a huge hurtle to get past. Now I can finish the wiring for the main deflector dish and torpedo launchers and finally seal off the saucer section and get ready to add the port side panel frames into place.
                                In other areas I had to replace the hanger deck on the aft side of the Dock. Some of the fiber optics were not lining up the way I wanted to so I redid the entire deck. It looks much better now and I have all of the chase lighting done for the entire aft end of the modules. The small hangers have the chase lighting heading into the deck whereas the larger hanger has the lighting running in take-off mode with a few shuttles in position for launch. I have 7 new pics and 4 new videos of the chase lighting effects in this month's updates I should be able to get more done in the upcoming month. Once again I apologize for the long delays. Hang in there and I'll get this thing done soon. Thanks for your patience and keep checking for more updates.
                                Mark
                                ...Once it's activated, there's no way to stop it! - Scotty: DMa
                                www.NemVia.org

                                Comment

                                Working...
                                😀
                                🥰
                                🤢
                                😎
                                😡
                                👍
                                👎