If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
This helmet could possibly fit Battlestar Galactica action figures from the 70s. If you want to use this for your BSG figures do a test print and fit. Use at your own risk. I do not want to hear you guys/gals damaging your figures.
These pilots helmets fit the Buck Rogers action figures, Buck on Buck Rogers and Wilma on Wilma Deering. Wilma's helmet is larger, because of her hair (if you own the action figures you understand). I made these to fit rather loose! Please understand that removing the helmets on and off of your figures will cause damage to the paint on the heads. Please use at your own risk!!!
I used tk6831 https://www.thingiverse.com/thing:3677201 helmet and remodeled it. The stickers I used on the helmets are in the original helmet link provided. You will have to resize the photo, I used Windows Paint.
If you want the Starfighter/Thunderfighter ship please go to https://www.myminifactory.com/object/3d-print-thunderfighter-126004
Aitor Baltziskueta this guy did an amazing job modeling a Starfighter/Thunderfighter. It is the one used in the photos.
Humans living on the twelve colonies of Kobol were attacked by a robotic alien race known as the Cylons. The survivors only hope is to find Earth and hope that they are advanced enough to help us defeat the Cylons
In the development of the Viper Mark I prior to the commencement of the war with the Cylons various designs where considered for the fightercraft that would populate a Battlestar, One of the earlier options was a 2 seater version with pilot and gunner carrying internal missile bays as well as an additional laser canon in the vertical stabilizer.
Ultimately this design was not adopted as the mainstream attack support craft as the Mark 1 was more agile and faster although not as well armed.
Designed from scratch in Autodesk 123d, this is my take on a Battlestar Galatica Viper, the canopy is the tricky bit and I may change the design (design 2 not updated), whichever way I go you will need to cut some clear thin perspex for the canopy glass. I scaled up 200% at that the model needs to be split and cut and will take over 60 hours to print, although this is a work in progress so things may change. As you can see I've done the landing skirt for the wings but not the front skirt, as an atmospheric craft may need some flaps on the wings but they wouldn't be standard aircraft type, the pilot seat needs a joystick, main body needs cover for internal missile launcher, but can modify to show a missile under the cover, endless possibilities which 3d printing allow - if you download this model please post a "like", thank you :
I have finally hit my breaking point. I was very happy to provide these pieces free of charge, however i am tired of being taken advantage. It is not right for people to take my work and make a profit from it.
You can download the files from either cults3d or etsy.
https://www.etsy.com/shop/UncleScottsToyShop?ref=related&listing_id=1221693883#items
https://cults3d.com/en/users/scott_melody_mills/creations
If you feel so inclined you can personally thank the following list of scum and Villany for the fact that you can no longer have these files free of charge.
The Hive Of Scum and Villany
FACEBOOK
Luke Barker
ETSY
BestBattlePlan
CULTS3D
oddball13
EBAY
rbennett1187
3drepmaker
bat846
wattos_scrapyard
smartswarehouse
argon98
thisistheway3d
jmarshsellsout
68mustangv8
3dmelty
tant3dprints
dim3nsions
That Battle acoss the stars is shaping up to be a really big one, now that you can add the V skyfighter to your fleet.
There are slots on the top hatch that are made to fit neodymium magnets 1/4 X 1/16 " . Also you need to use a piece of filament for the hinge.
For the rear window there are three options to download. Just panes, panes with a very thin layer between them, and Lefty. Lefty needs to be printed twice with one of them mirrored, and then glued together before being glued to the rear
PLEASE leave a comment if there is another toy you would like to see made.
Download for free the extra parts for the for the 1.5" scale figure , modular ships. You can find all of the items shown here at https://www.etsy.com/shop/UncleScottsToyShop?ref=shop_onboarding&ele=shop_open
I would love to share these items for free, however we can all thank the people listed below, for there efforts have made it so that i must now charge for my creations.
FACEBOOK
Robert Bergeron
Luke Barker
ETSY
Geekcandylab
BestBattlePlan
EBAY
rbennett1187
3drepmaker
bat846
wattos_scrapyard
smartswarehouse
argon98
thisistheway3d
jmarshsellsout
68mustangv8
3dmelty
tant3dprints
dim3nsions
Download for free a replacement tread for the buck rogers Landram. You can find all of the items shown here at https://www.etsy.com/shop/UncleScottsToyShop?ref=shop_onboarding&ele=shop_open
I would love to share these items for free, however we can all thank the people listed below, for there efforts have made it so that i must now charge for my creations.
FACEBOOK
Robert Bergeron
Luke Barker
ETSY
Geekcandylab
BestBattlePlan
EBAY
rbennett1187
3drepmaker
bat846
wattos_scrapyard
smartswarehouse
argon98
thisistheway3d
jmarshsellsout
68mustangv8
3dmelty
tant3dprints
dim3nsions
I like new things, Great ideas, and sharing with a community. I have way too many hobbies to list, but i love most kinetic sculptures/toys .
Try to give something back for what you take, and make. Appreciate people's time for what they have done. And improve upon THINGZ if you can.
This helmet could possibly fit Battlestar Galactica action figures from the 70s. If you want to use this for your BSG figures do a test print and fit. Use at your own risk. I do not want to hear you guys/gals damaging your figures.
These pilots helmets fit the Buck Rogers action figures, Buck on Buck Rogers and Wilma on Wilma Deering. Wilma's helmet is larger, because of her hair (if you own the action figures you understand). I made these to fit rather loose! Please understand that removing the helmets on and off of your figures will cause damage to the paint on the heads. Please use at your own risk!!!
I used tk6831 https://www.thingiverse.com/thing:3677201 helmet and remodeled it. The stickers I used on the helmets are in the original helmet link provided. You will have to resize the photo, I used Windows Paint.
If you want the Starfighter/Thunderfighter ship please go to https://www.myminifactory.com/object/3d-print-thunderfighter-126004
Aitor Baltziskueta this guy did an amazing job modeling a Starfighter/Thunderfighter. It is the one used in the photos.
Humans living on the twelve colonies of Kobol were attacked by a robotic alien race known as the Cylons. The survivors only hope is to find Earth and hope that they are advanced enough to help us defeat the Cylons
In the development of the Viper Mark I prior to the commencement of the war with the Cylons various designs where considered for the fightercraft that would populate a Battlestar, One of the earlier options was a 2 seater version with pilot and gunner carrying internal missile bays as well as an additional laser canon in the vertical stabilizer.
Ultimately this design was not adopted as the mainstream attack support craft as the Mark 1 was more agile and faster although not as well armed.
Designed from scratch in Autodesk 123d, this is my take on a Battlestar Galatica Viper, the canopy is the tricky bit and I may change the design (design 2 not updated), whichever way I go you will need to cut some clear thin perspex for the canopy glass. I scaled up 200% at that the model needs to be split and cut and will take over 60 hours to print, although this is a work in progress so things may change. As you can see I've done the landing skirt for the wings but not the front skirt, as an atmospheric craft may need some flaps on the wings but they wouldn't be standard aircraft type, the pilot seat needs a joystick, main body needs cover for internal missile launcher, but can modify to show a missile under the cover, endless possibilities which 3d printing allow - if you download this model please post a "like", thank you :
I have finally hit my breaking point. I was very happy to provide these pieces free of charge, however i am tired of being taken advantage. It is not right for people to take my work and make a profit from it.
You can download the files from either cults3d or etsy.
https://www.etsy.com/shop/UncleScottsToyShop?ref=related&listing_id=1221693883#items
https://cults3d.com/en/users/scott_melody_mills/creations
If you feel so inclined you can personally thank the following list of scum and Villany for the fact that you can no longer have these files free of charge.
The Hive Of Scum and Villany
FACEBOOK
Luke Barker
ETSY
BestBattlePlan
CULTS3D
oddball13
EBAY
rbennett1187
3drepmaker
bat846
wattos_scrapyard
smartswarehouse
argon98
thisistheway3d
jmarshsellsout
68mustangv8
3dmelty
tant3dprints
dim3nsions
That Battle acoss the stars is shaping up to be a really big one, now that you can add the V skyfighter to your fleet.
There are slots on the top hatch that are made to fit neodymium magnets 1/4 X 1/16 " . Also you need to use a piece of filament for the hinge.
For the rear window there are three options to download. Just panes, panes with a very thin layer between them, and Lefty. Lefty needs to be printed twice with one of them mirrored, and then glued together before being glued to the rear
PLEASE leave a comment if there is another toy you would like to see made.
Download for free the extra parts for the for the 1.5" scale figure , modular ships. You can find all of the items shown here at https://www.etsy.com/shop/UncleScottsToyShop?ref=shop_onboarding&ele=shop_open
I would love to share these items for free, however we can all thank the people listed below, for there efforts have made it so that i must now charge for my creations.
FACEBOOK
Robert Bergeron
Luke Barker
ETSY
Geekcandylab
BestBattlePlan
EBAY
rbennett1187
3drepmaker
bat846
wattos_scrapyard
smartswarehouse
argon98
thisistheway3d
jmarshsellsout
68mustangv8
3dmelty
tant3dprints
dim3nsions
Download for free a replacement tread for the buck rogers Landram. You can find all of the items shown here at https://www.etsy.com/shop/UncleScottsToyShop?ref=shop_onboarding&ele=shop_open
I would love to share these items for free, however we can all thank the people listed below, for there efforts have made it so that i must now charge for my creations.
FACEBOOK
Robert Bergeron
Luke Barker
ETSY
Geekcandylab
BestBattlePlan
EBAY
rbennett1187
3drepmaker
bat846
wattos_scrapyard
smartswarehouse
argon98
thisistheway3d
jmarshsellsout
68mustangv8
3dmelty
tant3dprints
dim3nsions
Comment