Page 3 of 3 FirstFirst 123
Results 21 to 25 of 25

Thread: My 1/8 Scale BTTF Delorean (WIP)

  1. #21
    Join Date
    Jan 13, 2009
    Location
    Greenville, SC
    Posts
    889
    Looking great! Stinks about the four issues. That's the reason I've never done one of these. I'm sure it'll get worked out though.

  2. #22
    NOVEMBER UPDATES - 2019

    Hey everyone! Well, still no word on when I'll receive my missing issues which are now Issues 75, 76 and 77. I really don't know what Eaglemoss will be sending me until I get my next automated order. They did send me Issue 74 which is the issue that has the hinge panel for the passenger side gull wing door, so I was able to get that into place, and I also received Issues 79, 80 and 81. 79 & 80 are the passenger side rear panel and trim assemblies, which are very easy to assemble. Issue 80 also has similar parts to Issue 78 which are the trim pieces for the rear panels as well as the mounting brackets for some of the lighting effects. Issue 81 has a part called the "engine surround" which will eventually be filled up with wiring and more greeblies. I have 17 new pics added to the 1/8 scale BTTF DeLorean page which includes the pics and parts for Issue 74 which is now in sequential order. Now, depending on when my next shipment will get here will determine if there will be an update for December. My busy season begins next month so I might not have too much time or energy to get anything done. If not, there will be a big update on January of 2020. Who knows. Well, that's it for this update. Keep checking the website and we'll see you next update!
    Mark
    https://www.nemvia.org/apps/photos/photo...=205996566
    http://www.NemVia.org

    100_8432.jpg

    100_8439.jpg
    ...Once it's activated, there's no way to stop it! - Scotty: DMa
    www.NemVia.org

  3. #23
    JANUARY UPDATES - 2020
    Well, it's now 2020 and so far, this year has not started off well in the DeLorean build department. I received Issues 88 through 91 in December, but found out that there were two things that needed to be taken care of before I could move forward on the build. 1) and most importantly, I discovered that while trying to add the assembly Issue 91 to the engine which, by the way is the engine air filter assembly, I found that I had put the left and right air intakes, on the manifolds, facing the wrong direction. A major OOOPS! I decided to put off working on this project until after my peak season at work, otherwise I was going to hurl the car at the basement wall and be done with it. This was a bit frustrating, too because I still have not received Issues 75, 76, and 77, and it's now going on four months, with a new complaint letter sent in every month I don't get these Issues. And in order to move forward on the build, I need the parts from those Issues. Issue 74 is still in it's parts bag because I have nowhere to put these pieces. Anyway, when things calmed down at work I decided to fix the manifold problem. This gave me something to do while waiting for the next Issues. I had to reverse engineer how to get the manifolds off and turned around to the correct position. I did have to remove the engine to get to the manifold, but I finally got it into it's proper position, and now the air filter and other system pipes fit very nicely. But that's not all... You're not gonna believe this one.... I get my usual notice that my Issues would be mailed out, but I didn't pay attention to which ones I would get until they were delivered. so now, I'm not only missing 75, 76 and 77, but now I didn't get 86, 87 and 92 and 93. What I received are Issues 94 - 97 but I don't have the other Issues to assemble these parts together. (I guess you could say I have Issues with my Issues) So I'm not going to even open the parts bags for these until I get the other parts. Man! what a disappointment. And still no word from Eaglemoss on this problem But!!!! I still have posted some interesting pics of what I was able to get done despite not having what I need. I've assembled what I could starting from Issues 82 - 85, then 88 - 91. Some of the interior parts were added, such as the seatbelt harness pieces and of course the air filter assembly. The engine cover is made from metal and the detailing on the grates is quite awesome. But this is about all I was able to do for the last two months. So there are 49 new pics in the 1/8 scale BTTF DeLorean page. I hope you can at least enjoy those. That's all for now, keep checking my site to see if those missing Issues will ever get here!
    Take care, Mark
    https://www.nemvia.org/apps/photos/p...toid=206058226
    http://www.NemVia.org

    100_8475.jpg100_8478.jpg
    ...Once it's activated, there's no way to stop it! - Scotty: DMa
    www.NemVia.org

  4. #24
    Join Date
    Sep 12, 2007
    Location
    richmond va
    Posts
    656
    Images
    10
    this model costs about $1800?

  5. #25
    Yeh, pretty much. That's why the subscription for the parts can be spread out from 24 to 36 months, depending on what you set up to buy this kit. You can also pause the subscription if it's too much for you, then resume it when you can afford it.
    Mark
    ...Once it's activated, there's no way to stop it! - Scotty: DMa
    www.NemVia.org

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •